Views: 3 Author: Site Editor Publish Time: 2023-12-01 Origin: Site
1.Insert round bars into the top, bottom and middle part of the metal fabric to replace woven weft wires.
2. Connect the top round bar with eyebolts and then tension and secure eyebolts to continuous substructure profile with nuts or with fastening brackets.
3. Warp wire connectors around intermediate round bars located behind the mesh fabric and hold the mesh fabric from the backside.
4.Insert the bottom round bar with eyebolts into the mesh fabric and connect eyebolts with tension springs. Fasten these springs onto the bottom brackets or a continuous substructure to tension the panels.